,

GM Tech-2 PRO Kit With CANDI Interface


130,000.00

Product Description

GM Tech-2 PRO Kit With CANDI Interface

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_b

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_c

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_d

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_e

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_f

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_g

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_h

GM Tech 2 The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems.

Features Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles. Support for on-board diagnostics on all GM systems.

Removable hardware modules provide insurance against scan tool obsolescence. Large, easy-to-read backlit screen. RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. Ability to view the status of vehicle diagnostic tests as they run. Bi-directional The authentic GM software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

Vetronix Tech-2 Specifications Dimensions: 12″ Microprocessor: 32 bit, 16 MHz. Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.

Communications: Integral RS232 communication port. Screen: 3.8″ backlit monochrome with full graphics. Capability: 320 40 pixels. Displays up to 9 vehicle parameters at once.

Tech 2 Kit Includes 1. Tech 2 Flash Tester 2. DLC Cable, DLC Loopback Adapter 3. 12V Cigarette Lighter Power Cable 4. SAE 16/19 Adapter 5. NAO 12/19 Adapter 6. Candi Module 7. Battery Power Cable

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_i

Or you can select the options and get nice price!

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash??s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_j

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_k

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_l

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_m

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_n

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_o

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_p

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_q

GM-Tech-2-PRO-Kit-With-CANDI-Interface_3530010_r

Note: if you buy Option3: 32 MB PCMCIA Card with Suzuki software, here is the note for Suzuki card, when you open the GM Tech-2 PRO Kit With CANDI Interface with the Suzuki card, the screen is dark for operating,

how to solve this problem?

1. open GM Tech-2 PRO Kit ,enter it ;

2. choose F1 BUTTON;

3. choose F1 BUTTON;

4. press “sheft” on the table ,and you will see that the light is on;

5. then you press up or down to change the screen brightness.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.